services

How to Choose Oil Press

Now the oil press can be used for general processing of soybean, jatropha,peanut, sesame, rapeseed, canola, sunflower seeds, olives and other particles and also can be used for rice bran, corn germ powder, such as oil and safflower oil, and other few wild plants of oil-bearing materials.

How to Use Oil Press

Before using the oil presses, first of all should be ready for all of assistant devices and containers, check and adjust the degree of tightness of belts. And then start up the motor so that the machine run empty of material around 15 min, checking the rotate speed of screw pressing worm. The general speed should be around 33 minutes.

Raw material preparation

Oilseeds and nuts should be properly dried before storage, and cleaned to remove sand, dust, leaves and other contaminants. Fruits should be harvested when fully ripe, cleaned and handled carefully to reduce bruising and splitting.

The skill to increase the canola-oil output rate for 25% more

Generally the canola oil output rate only reaches 30%, with the following method, you can get extra 25%.   In the processing, the contained sand and dust will absorb some oil, decrease the oil output rate. Please clean the contained sand and dust before the pressing.

Application Security Matters

The press must have a good grounding device unless boot. In the heating process, users should always check the leakage press (such as instrumentation, electric pen, etc.). If the press charged, under normal circumstances is due to leakage caused by the heating coil, solution should be the replacement of the heating coil leakage but not the continuous use of it.

FAQ of Oil Press

The screw oil press often used to press soy bean, cottonseed, peanut kernels, sesame, and rape seed is ideal for the small rural oil mill. Sometimes, it may go wrong for various kinds of reasons, such as, produce less or even no oil. At this time, prompt processing must be used to put it right.