0086 372 5951936

info@chinaoilpress.net

blog

FAQ of The Oil Extruder Process of Vegetable Oilseeds

1. whick kind of material can be extruded?
It can extrude soybean, maize, millet, schrot (for support fox, mink, squirrel, otter), pet food (for  dogs, cats), water, fodder and ornamental fed animal feed (for shrimp, crab, eel, carp, goldfish and frogs floating feed), animal waste, animal blood meal, feather meal and rice bran preservation, also can be puffing pig, rabbit pellets, etc., can be puffed rice, maize, sorghum, rice with for food and casting materials such as adhesive filler

2. what's the main purpose of extruding processing?
Extruding, also known as structured or organized, expanded produce starch gelatinization, destruction if raw materials in the anti-nutritional factors and the role of Salmonella with the elimination of the use of extruded feed materials on the pretreatment of principle, in puffing a small loss of nutrients during processing, can be achieved The purpose of raising the protein is beneficial to animal digestion and absorption, thus expanding treatment through a number of cheap raw materials can replace the precious raw materials, without affecting the quality of feed, so reducing costs, development of feed resources played an important role.

3. what's difference between our extruder and previous equipments on animal feed production?
Early by the original production process conditions and equipment, and many other factors,
production of fish feed most of the hard particles the whole feed, fish feed, for example, hard pellets that spread in the water, because its structure determines the material can not be eaten by fish to maintain particle integrity prior to feed dissolved in water, releasing large amounts of sugar, starch and other substances, causing the fish not only a waste of material, but also lead to bacteria, fungi breeding in the pond at the bottom of a large number of , resulting in high death rate of fish, how to produce low cost, high efficiency, low pollution and high raw material digestion, nutrition, variation is small, lower harmful ingredients, safe green feed as the farmers of the urgent needs.
We developed a series of aquatic feed extruder to solve this problem, the aircraft according to actual needs, can produce floating in the water or sinking to the water feed, feed, spread time is not less than 2 hours, to facilitate

4. How many hours do we have to change the lubricant oil one time?

Box bearing grease filling in time, run 500 hours, all change once (the new machine suitable to run before adding grease, oil change should be after running 200 hours). Regular lubrication and other bearing parts.

5. What do we pay attention during the machine running?
Screw, cover wearing parts such as the process of disassembly is prohibited heavy hit with a hard object, puffing chamber placed on the non-weight or to stand on

6.What do we do on delaying the life of spare parts?
1) Raw materials should be subject to clean up metal, foreign objects into the machine prevent damage to parts inside.
2) Always check the quality of extruded materials, attention to replacement of wearing parts.
3) Keep equipment clean around.
4) If long-term shut down or replacement of extruded materials, it should be cleaned of materials extruded cavity to prevent caking, mildew or cross contamination of materials. 
 

Quick Message
Recommend Products
Blog